CYT2606L 1 o f 1 pfm s t ep-up dc-dc converter general description the CYT2606L series are pfm step-up dc-dc converters with very low ripple noise due to the high operation frequency . the m a xim u m operation frequency is 400khz. only three com ponents are required to realize the conversion from the battery voltage to a selected output voltage. a driver pin (ext) is provided for driving extern al po wer trans i stor to exten d the outp u t current capability where lar g e current is required. enable pin (en) is also provided so that the circuit can be powered down. ordering information featur es 400khz maxim u m operation frequency 2.0v to 5.0v output voltage w ith 0.1v step low start-up voltage: 0.8v at 1m a 2% output voltage accuracy up to 88% efficiency output current: 300m a at 2.5v input, 3.3v output low ripple and low noise output current extendable by external switch applications power source for applications where a higher voltage than the battery voltage is required one to three cell battery devices power source for cam eras, cam corders, vcrs, pdas, pagers and hand held com m unication instrum e nt t y pical applications
CYT2606L 2 o f 2 block diagram c b o e h b q 1 ' . d p o u s p m 0 4 $ , ) [ c v g g f s & |